1 / 5
Creality K1 Flanged Bearing Gantry (FBG) Project Remix with new X and Y carriages — image 1
1 / 5

Creality K1 Flanged Bearing Gantry (FBG) Project Remix with new X and Y carriages

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixing Y-axis carriage and reworking of some other parts

Rating
5 / 5
Likes
129
Downloads
476
Makes
2
Views
4,766
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Unchanged and added for the kit: higher_tensioner_spacer, interbearing-washer, lower_tensioner_spacer.

The X-axis carriage is based on a CAD model from Henlor  -https://makerworld.com/en/models/171995

The X-axis carriage with an oval hole has never been tested, I use the option with round holes and without springs.

FBG BOM:

  • Bearing F623 (2RS or ZZ) - 24 pcs
  • M3x40 FHCS - 4 pcs
  • M3x25 FHCS - 6 pcs
  • M3x8 FHCS - 16 pcs
  • M3x20 SHCS - 2 pcs
  • M3 Thin Square Nut - 2 pcs
  • M6x10mm Set Screw - 8 pcs
  • M3х5х4,5 Heat Set Inserts - 18 pcs (for gantry)
  • M3х5х4,5 Heat Set Inserts - 13 pcs+ M2 Heat Set Inserts - 2 pcs (for X carriage)

X-axis POM BOM:

You need to plug the ends of the aluminum tube with POM bushings, there will be a little free space in the middle, silicone grease with fluoroplast can be added there. After assembly, the inner diameter should be 10.05 or less.

Sound test after a complete upgrade of K1 Max. FBG portal, new Y-axis rods with MYT bearings and POM bearings for the X-axis. (Easy cheat, I use Leadshine motors)

Tags