Ender 6 Voron gantry conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
XY Joints to use 9mm Belts and MGN9 rails
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I’ve redesigned this build to use 9mm belts, and lower the x-gantry. So you will loose about 10mm in the build hight.
But now you will be allowed to use other stepper motors with shaft in 22mm lenght and the original idlers with modifieded spacers.
Another benefit is, you can use the whole buildplate of the ender 6
For my conversion of my Ender 6 I used the x-carriage from covertpluto3502
Note:
Make shure your Printer ist adjusted well, the tolerances are very thight! (0,1mm)
Ive used ABSx from Nobofil for this print.
Nozzletemp: 260 C
Heatbed: 100 C
Layerhight: 0,2 mm
wall loops: 3-4
bottom shell layers: 4
top shell layers: 5
infill: gyroid 15%
There are also some little changes in the BOM
For the XY Idlers you need
M5x45 BHCS 4x
M5x40 SHCS 6x
M4x12 BHCS 6x
M5 hex nuts 10x
M3x12 BHCS 8x
M4 Roll in t nuts 6x
2020 extrusion 358mm long 1x
6mm GT2 Timing Belt - 2 meters 2x
GT2 Toothless Idler Pulley 20-5-W10 (outer dim. 18x13mm) 4x