1 / 5
VORON 2.4 350mm Bottom Air Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this mod to improve airflow and temperatures on the Voron's electrical panel.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Using this air shroud directs the airflow better, and I can also lower the skirt fans to 40% while still being just as effective but much quieter. Regarding temperatures, they've dropped about 10°C on the BTT Pi and the Octopus MCU. Also, if you have enough money, just buy some Noctua fans.
The panels must be glued together using some type of elastic adhesive after checking for gaps and distances. They fit snugly between the fan and the skirt that supports it.
