1 / 8
Hairdryer Radiator Mount — With Diffuser Slot | Hardware Required — zdjęcie 1
1 / 8

Hairdryer Radiator Mount — With Diffuser Slot | Hardware Required

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frees up counter and drawer space without drilling holes in your wall. Includes a slot for a diffuser attachment.

Ocena
0 / 5
Polubienia
5
Pobrania
14
Wydruki
0
Wyświetlenia
75
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

Keep your hairdryer stored in a convenient, accessible spot by mounting it directly onto a radiator pipe. Frees up counter and drawer space without drilling holes in your wall. Includes a slot for a diffuser attachment.

Compatibility:

  • Radiator pipe: Ø31mm, 40.5mm mounting height, 31mm width

  • Mounting plate clearance: 23mm wide, 26.5mm tall

  • Hairdryer hook: 65mm diameter at top, 55mm at bottom

Hardware Required:

  • 4x M3 screws, 12-25mm length

  • 4x M3 hexagonal nuts (ISO 7380)

Nuts are strongly recommended — heavier hairdryers will pull screws out over time without them.

Print Settings:

  • Material: Heat resistant filament strongly recommended (PETG minimum, ASA preferred). PLA works but may deform near a hot radiator over time

  • Walls: 3

  • Infill: 20%

  • Supports: Yes

Notes: Technical drawings included for fit verification before printing.

Tagi