1 / 8
Hairdryer Radiator Mount — With Diffuser Slot | Hardware Required — image 1
1 / 8

Hairdryer Radiator Mount — With Diffuser Slot | Hardware Required

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Frees up counter and drawer space without drilling holes in your wall. Includes a slot for a diffuser attachment.

Rating
0 / 5
Likes
5
Downloads
14
Makes
0
Views
75
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial

Keep your hairdryer stored in a convenient, accessible spot by mounting it directly onto a radiator pipe. Frees up counter and drawer space without drilling holes in your wall. Includes a slot for a diffuser attachment.

Compatibility:

  • Radiator pipe: Ø31mm, 40.5mm mounting height, 31mm width

  • Mounting plate clearance: 23mm wide, 26.5mm tall

  • Hairdryer hook: 65mm diameter at top, 55mm at bottom

Hardware Required:

  • 4x M3 screws, 12-25mm length

  • 4x M3 hexagonal nuts (ISO 7380)

Nuts are strongly recommended — heavier hairdryers will pull screws out over time without them.

Print Settings:

  • Material: Heat resistant filament strongly recommended (PETG minimum, ASA preferred). PLA works but may deform near a hot radiator over time

  • Walls: 3

  • Infill: 20%

  • Supports: Yes

Notes: Technical drawings included for fit verification before printing.

Tags