118 models
Overview This is a wall mount for a hairdryer that uses the Toughbuilt ClipTech hub mounting system. You will need one of these: https://www.printables.com/model/1521234-remix-toughbuilt-cliptech-hub-wall-mount Printing Print the linked…
Print approx. €4.17–€5.10 excl. taxPreliminary estimate for PETGSource material: PET
A simple Wallmount for the Dyson Hairdryer
A hairdryer holder for mounting in the corner next to the sink. Has a cutout for cables for toothbrushes or similar. Can be printed with no supports. Use 0.3mm layers and/or high infill for strength. Watch me make it here:
You need to glue it to the wall with a strong glue.
Föhn Wandhalterung: Mit dem Ring auf dem Druckbett drucken Hairdryer Wallmount: Print with the ring on the print bed Category: Household Supplies
simple Hairdryer holder with a starting diameter of 75mm. Print it upsidedown!
By now it's a daily driver for years. The cables always got in my way till I decided to design this model. So maybe it will help you too. :) Always be careful when your Hairdryer or Straightener is still hot! On my end it works to store…
Hairdryer holder, mounts with double sided tape (foam core) inner diameter: 95mm
Just a hairdryer wall mount holder / stand for Rowenta. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 30 **Filament:** FormFutura rePLA White Category: Household
Simple wall mount, secured with double sided tape.
Föhnhalterung / Hairdryerholder
I wanted to design up a hairdryer that looks nice but also more importantly: 1. is sturdy 2. out of the way 3. takes up less filament 4. holds a HEAVY phillips hairdryer 5. easy to use 6. easy to print No supports required recommend print…
More information and pictures soon! Print Settings Printer: AnkerMake M5 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 30% Filament: Overture PLA+ Black Category: Bathroom
Somewhere in the abbyss of 2020, my OCD no longer coped with the hair dryer and the hair-curler (I'm not sure how the thing is called) lying on the flat surface. In the quest to arrange and organize everything, several versions of wall…
Print sideways with tree supports for the hole. 25% infill and up will feel solid.
This is a magnetic wall mount for Laifen hair dryers. The holder is made of two printed parts. The base can be glued directly to the wall or screwed into the dowel through a prepared hole. The second part has a preparation for pressfiting…
This is a 3d printable wall mount for the Dyson Supersonic Hairdryer. The Mount is designed to perfectly wrap around the contour of the cylindrical frame of the hairdryer. The Mount is adhered to the wall using double sided tape instead…
My hairdyer was damaged due to a broken fan. I designed the fan new and printed it on my Elegoo Mars 2 Pro. The Hairdryer is now working again and doesn't need to be replaced. Outer Fan diameter 59mm
Simple holder for Dyson Supersonic hair dryer with hidden screws. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20% Filament: Das Filament PLA gold-green Category: 3D Printing
This wall mount was designed for a BaByliss hair dryer with a tapered diameter of approximately 88 mm (top) to 84 mm (bottom). Other hair dryers may also fit, but it’s recommended to measure beforehand. If necessary, the mount size can be…
Wallmount for Remington hairdryer Wandhalterung für Remington Haartrockner https://www.amazon.de/gp/product/B07W34FS3Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8 Print Settings: Material: ABS Layer height: 0.20 - 0.30mm Supports: no
This is a modular hairdryer holder that can be customized. All measurements are in mm
I didn't make the model I just added screw holes so I could screw it to the cabinet in the bathroom credit for the original model goes to DerDerIchBin https://www.printables.com/social/379845-derderichbin/about
Hairdryer holder can can be fixed against wall or cupboard Measure your hairdryer beforehand as this holder was custom made
Mount for Hairdryer Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.20 Infill: 25% Filament: noname PLA Black Category: Bathroom
Ich wollte den Föhn bei mir im Bad nicht immer auf irgendwelchen Schränken rumliegen haben, deshalb habe ich diesen praktischen Wandhalter designt. Er passt perfekt für meinen Philips Föhn, sollte aber aufgrund der konischen Form auch für…
I really liked the power, the short length and the design of the Philips Pro (HPS910/00) hairdryer that I bought. However, there was no diffuser (the cup-like thing with the many spikes ;) included. Neither was there one available from…
einfache Halterung für Haartrockner Durchmesser ca 80mm, gedruckt in PetG
The IKEA TISKEN is a very strong suction cup that holds a hairdryer without any problems. The inner diameter is 73mm and probably fits many models. The print in the standard draft profile (0,3mm Layer) with PETG (heat resistance) takes…
just a simple model I made to reduce clutter on my bathroom counter. Make sure to print upside down from how the model is oriented to ensure the arms are strong enough to hold. I used PLA+ and it seems to be strong enough to get the job…
HairDryer holder made with an hook for IKEA (17mm clearence)
My wife bought a new hairdryer, it didn't fit the old spiral metal bracket. I designed this bracket to hold the hairdryer against the bathroom wall but still provide clear access to the power outlet. Internal diameter for the dryer holder…
I needed Wall Mount for my Rowenta hairdryer to save some space in my little bathroom. I made this wall mount that perfectly fits Rowenta CV5831F0 Studio Dry Glow with attached adapter (of course, also works when not attached). It also…
Printed with 50% infill, 3 wall counts.
Purchase list Any MagSafe ring e.g. Baseus Magnetic Sticker For Wireless Charger Metal Plate Ring For Magsafe Phone Holder Iron Sheet Magnet For iPhone 13 12 11 XS Default version doesn't got drill hole, so you need either mod it or using…
Can be easily mounted on various surfaces using a double sided heavy duty adhesive tape. Be sure to clean any dirt and oil from surface before applying the tape. Print from PLA.
The model is here: https://cad.onshape.com/documents/c9d373c6c20467bc5b088d7c/w/9b471f9dc9c50cbe2b0fe04f/e/22cba639be76768aec865a79 This 3D-printed adapter bridges the gap between a standard hairdryer (with a 45 mm diameter nozzle) and a…
Slopehill Hairdryer and Accessories Holder Keep your styling tools organized with the Slopehill Hairdryer and Accessories Holder ! Designed specifically for this specific Slopehill hairdryer model , this holder ensures your hairdryer and…
This was a quick fix to add a hook to the wife’s new hairdryer, to hang it up when not in use. A (UK) 2 core cable is a tight fit to push in and has never come off. Best fitting method I’ve found is to get the cable just held by the…
Simple hairdryer holder for bathroom helps saving space and makes your bathroom more organized. Easy to print with PLA but should be printed with 4 walls , minimum 4 bottom/top layers and infill 25% for strength. Diameter of mounting…
Added the Fusion 360 design file in case you want to make some changes.
Simple ring type hairdryer holders are not stable enough for tail-heavy hairdryers. This one supports the barrel too. For the print orientation please refer to the 3mf file or the screenshot. No support needed. I used PETG because of the…
The Dyson Reinforced Hair Dryer Mount now remixed with MatthewWaters_464803 's model with mounting screw holes. Reinforced Hair Dryer Mount with Mounting Screw Holes Infill of 50% No Supports 6 perimeter shell layers I recommend getting…
Designed for Babyliss Perfect Finish AS126E
The original mouth piece attachment that comes with the hairdryer is almost purposefully bad with poor direction of air flow. It also is only held in place with 3 click in tabs that fails almost comically easily. I created a thinner and…
To thoroughly dry a CPAP hose after cleaning (or because of condensation from the humidifier) you need to blow a lot of warm air through it. So I made this adapter which connects a Braun Satin Hair hairdryer to a standard 22mm CPAP hose.…
After countless times of losing and finding this hairdryer tip, I figured it's finally time I decided to create a replacement. The model is designed around the Babyliss 2300W Ionic hairdryer but should work universally with other models.…
Mount your Hairdryer with this simple mount. As an extra it has a hook to hold the cable.
I have a really old hairdryer and I wanted a cradle to store it in for my bathroom. Looks like they still make this model of hairdryer too https://www.amazon.com/Conair-Dryer-Ionic-Conditioning-Chrome/dp/B003FBG88E. This model is meant to…
I've had this mount in use for close to 3 years now and has worked perfectly.
Keep your haircare products off the floor and tidy with these handy mounts. Tangled cables eventually cause failure, keep the tangles to a minimum by hanging your haircare devices up rather than chucking them in a basket or on the floor.…
Wall-Mounted Bathroom Organizer (Log Cabin Style) A spacious and practical holder for your hairdryer, combs, cosmetics, and other bathroom accessories. Designed with a decorative horizontal log texture to bring a cozy, rustic feel to your…
Introducing my alternative hairdryer stand a hassle-free solution for organizing your haircare essentials. Unlike traditional mounts, this stand requires no wall installation, saving time and effort without drilling any holes. Designed…
Want to get your hairdryer off your counter? Tired of rolling up the cable and tucking it away in a cabinet, only to pull it out again the next morning? Look no further! Uses two screws with drywall anchors (or mount however you'd like).…
Replacement part. Prevents big chunks of dust getting sucked into the hairdryer. Easy installation for a satisfying result. Hairdryer model is 6614 Ipro 2200.
Very simple hairdryer holder, because I didn't like any of the other designs I could find. Holds it by the handle, rather than the ends, and so should work for a wide variety of hairdryers - while still having an opening to get the cable…
Wallholder for Hairdryer. Diameter 83cm. 3 Versions: For Screw (never tested, tell me if it works properly) For Flat Doubletabe For Geltape (tested, wors fine)
A holder for a hairdryer which can be mounted to a piece of furniture via press-fit. Especially designed for: - Philips EssentialCare BHC010 - IKEA SUNDVIK It should work with most hairdryers and all furniture with an 18mm wide board to…
A simple hairdryer holder you can stick to the side of a bathroom cabinet. It comes with a little hook for the power cable.
A holder made for Hairdryers. You have to glue it into a corner. You can scale it up if your hairdryer is too big for it. I have made it for our hairdryer :…
Designed for Siegen SG-3049C02 hair dryer, but possibly compatible with other brands and models of similar dimensions (see photos). Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Pro Rafts: No Supports: Yes Resolution:…
This is a wallmount holder for Megaturbo Hairdryers (i thing mine is a 1001). It is split up into 2 models, one is the holder itself, one is for holding the cable. I have printed it in 0.2mm layerheight on a 0.4 nozzle and 15% infill with…
fits hairdryers with 42-44mm opening Print with 0.2mm layer height - no support needed printed with PETG (PLA should work as well) Usage: Make sure that you have a hairdrayer which has a cool mode otherwise you might risk to damage your…
Small holder for a hairdryer with strain relief for the cable. Holes for mounting with M5 screws. printed in PLA with 15% infill
I accidentally broke my hairdryer diffuser, so I measured the original object with a gauge, I created a 3D model and printed it. As first try, I printed it in PLA, but the hairdryer is too hot and PLA deforms. I will try to print in PETG…
My Wife bought a new Hairdryer and wanted a wallmount for it. Mounted with 2 screws.
Remix of Makes_by_Jake's awesome accessory holder.
To be printed with a material that can withstand the heat of the hairdryer (ABS/ASA/maybe PETG…).
This hanger clips over this shelf (https://amzn.eu/d/7nLHnBi) and should hold itself in place. STEP files are included if you want to adjust it for your own needs. The very thin bridge at the bottom is a single 0.2mm layer and is only…
all print files and editable file are uploaded, you can redesign it to your preferences… have fun printing.
Designed for type HP4935 There is also one for type HP8180 https://www.thingiverse.com/thing:2563634 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Infill: 100% Filament:…
A simple wall mount for a small Remington Hairdryer, with a hole for a hairbrush and a slot for a small comb. Fixed with 2 screws, although there are 4 holes if you think you need more. Saves some space in the bathroom and is surprisingly…
Wife bought a hairdryer that doesn't have a hanging hook. So I made one that attaches with a bar lock. 10/19/22 Added Hanger2 which changes the angle of the bar lock 90 degrees so instead of the cord being on the side, it's now on the…
A stand for a hair dryer. It's purpose is to hold a hair dryer so that it can balance a ping pong ball on the air stream. Can be used for science experiments with topic bernoulli. I used it at an event of my university to show the…
I scanned a hairdrier EH-NE6E made by Panasonic with iPhone and Qlone( scanner app). And designed a model to use it as hands free. Support necessary for the hook. I printed this model in Overture PLA professional. In order to increase the…
This is just a simple hairdryer fix for the Ikea Tisken system, inner diameter 83mm. Ein einfacher Fönhalter für das Tisken System. Innerer Durchmesser 83mm. Stabilität ist sehr gut. If a bigger inner or outer diameter is needed, I'm…
Summary Shoe dryer from hairdryer 1. Why? I want to have fast shoe/glove dryer without any additional tools that we've in home. It fit to hairdryer with internal diameter ~44,5mm. 2. How to mount? Put end to main body and press to…
This is a spare part for a Philips hairdryer HP8180 Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: 0,2mm Infill: 30% Notes: The model is for the right switch. For the left switch you have to mirror the…
Hairdryer Holder for our Bathroom; no Support; for towel rail; no screws needed; Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Filament: eSun PETG white Category: Bathroom
Hairdryer Wallmount for larger Dryers, printed with PETG.
Mount for the new dryer.. 3 versions
This is my hairdryer holder for the IKEA RÅGRUND bathroom shelf. The inner diameter is about 90mm. It can just be clamped on the upper part of the shelf, no screws needed.
Between Wall Hairdryer Holster Author: Brian Khuu 2019 Good for some bathroom to use the dead space between walls. E.g. Mirrors with walls that are next to another wall. Use command strips to mount it! Print instructions Category:…
A simple print to store your hairdryer. If you want to change the dimensions, I uploaded the Sketchup-Files as well.
Support suitable for wall fixing of all Parlux series accessories, can be printed without using supports Assembly Can be mounted using 3M adhesive tape or screws (2.5x20)
Keep your hairdryer stored in a convenient, accessible spot by mounting it directly onto a radiator pipe. Frees up counter and drawer space without drilling holes in your wall. Includes a slot for a diffuser attachment. Compatibility:…
Anti-slip-mat baseplate for the DYSON SuperSonic Hairdryer (note: PETG ftw!)
9I printed the Hair Dryer Holster (Holder) with slot and wide-set screws , however, I wanted to hold it in place using double-sided tape. The tape worked like a charm, but I want to make it look better so I designed this hole cover. Print…
This is a personalized solution for an hairdryer which had hes back filter broken as it's and old hairdryer. It's a very good one so when my aunt came it this problem I made this solution as my first solution designing in Fusion 360. I…
I designed this nozzle to achieve a more concentrated airflow. Its intended use is to cool the chocolate coating on homemade energy bars. It fits a Braun C-1700 hairdryer as seen in the picture, but might fit others as well. Tools needed:…
Hairdryer mount and cable keeper Uses M6 locknuts and M6 bolts (2 pairs each for mount and cable keeper)
Hairdryer Ikos cable repair
hook for that attached to drawer hander to hang objects such as hairdryer
I have been using this model daily for over 7 months on bathroom tiles, and it hasn't budged or shown any signs of fatigue. Key Features: Zero Drilling Needed: Designed specifically for thick, foamy double-sided mounting tape . Two…
Holder for a hair dryer that partially prevents its theft by running the power cord through a groove at the back (at the wall). The cord can be freed by the owner using 2 hidden screws (M6x30) at the bottom.
Nozzles for delicate dusting and/or smd work.
A replacement power switch for the BS1500 hairdryer. Not perfect, but good enough to restore function - modification encouraged, please improve on this! Original design file:…
This hairdryer is indestructible, except the strain relief. I have had to shorten the power cord at least three times, and each time improvised strain relief from tape, sugru or other stuff I had on hand. But now I did it properly: Behold…
