CPAP Hairdryer Hose Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect a haidryer to a CPAP hose
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 50
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To thoroughly dry a CPAP hose after cleaning (or because of condensation from the humidifier) you need to blow a lot of warm air through it. So I made this adapter which connects a Braun Satin Hair hairdryer to a standard 22mm CPAP hose.
The diameter is 61mm (reduces to 59mm), which makes it sit nice and tight on the dryer:

If you need other sizes write a comment, my design is quickly adaptable.
Printed it in PETG 0,2mm structural preset.
Use the hair dryer on lowest setting to prevent the PETG from deforming due to heat. I did not test how well PLA works with heated air…