CPAP Hairdryer Hose Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to connect a haidryer to a CPAP hose
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To thoroughly dry a CPAP hose after cleaning (or because of condensation from the humidifier) you need to blow a lot of warm air through it. So I made this adapter which connects a Braun Satin Hair hairdryer to a standard 22mm CPAP hose.
The diameter is 61mm (reduces to 59mm), which makes it sit nice and tight on the dryer:
If you need other sizes write a comment, my design is quickly adaptable.
Printed it in PETG 0,2mm structural preset.
Use the hair dryer on lowest setting to prevent the PETG from deforming due to heat. I did not test how well PLA works with heated air…