Knob - Mingda Magician Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knob - Mingda Magician Series Extruder Tension Screw - w/ retaining washer
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 186
- Wydruki
- 2
- Wyświetlenia
- 1125
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Mingda Magician Series - Extruder Tensioning Screw … Original - hate/hate relationship. Screw too short , head diameter too small - makes installing with filament already loaded nearly impossible (for me) to screw in. Added retainer washer to captivate knob assy (improved quality of life !). No more hate/hate relationship. https://imgur.com/a/cG6NK2c
Here's an even larger knob if you need one !!
V4 - Print this part and screw in a m3 x 30mm socket head cap screw into a recessed m3 hex nut, add 2 additional m3 hex nuts, and reuse original spring and washer.
V3 - Print this part and screw in a m3 x 25mm socket head cap screw, and reuse original spring and washer.
Retainer Washer Video - https://imgur.com/X9kIrXN
-------------------------------------------------------------------------------------------------------------
Revision History -
Updated 10/27/22
- Retaining Washer V2 - revised to be larger and thinner. Just seems to work better for me.
Updated 10/26/22
- Knob V4 - redesigned to accept m3 nut recessed on back side to prevent screw from spinning in knob. Uses 30mm long screw, so 2 additional m3 nuts required for appropriate length of thread.
Updated 7/7/22
- Knob V3 - design style like Y belt tension knob, made 0.5 mm thinner (difference on screw head side)
- Retaining Washer V1 - New
Updated 5/31/22
- Knob V2 - larger diameter, tighter fit on screw.