Liczymy pasujące modele…
This is a 2 piece cover for the Mingda Magician Series printers. It is basically the same size and shape of the original 1 piece cover, however split into 2 pieces - A fixed side held on with the original hardware, and a removeable side…
Here is a pair of 3d printed uprights to hold more 1kg spools OR a 3kg spool. It is designed to use a 1 1/8" or 28mm wooden dowel. Two uprights are required, just download the single model and mirror it for the second. Thank you to those…
I wanted to be able to have a filament spool holder with ball bearings for my new Mingda Magician X vs the stock holder. I took the two holders and merged them using Tinkercad to be able to have a base holder from Tueftler-Maker and top…
Mingda Magician Series - Extruder Tensioning Screw … Original - hate/hate relationship. Screw too short , head diameter too small - makes installing with filament already loaded nearly impossible (for me) to screw in. Added retainer…
Just a simple square to share generic PETG settings for PrusaSlicer on Mingda Magician Series
EDIT 9/9/23: Added MAX PETG MMMAX_30_SUNFIRE_GUIDE_SUPPORT - this 3mf project file was sliced with PrusaSlicer 2.61 - PETG, Magician Max - Config Bundle -> https://www.facebook.com/groups/mingda3dprinter/permalink/1850190608709882 EDIT…
This is a remix of Mingda Magician X Filament Holder Riser and it only contains two components instead of three as the original. It is made for extra small spools with a center hole where the diameter is 20 mm. So I modified the…
Start by putting the bed support on first and clip in past the heat bed support legs. Then install top support clip by sliding on from cable towards the bed. You can then secure with a zip tie. Print at least one of the Open Cable Chain…
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, ABS, GreenTec, GreenTec Pro or similar). New Version 2024-04-07:…
Print in place with a tiny amount of organic supports needed. Uses a small amount of PTFE tubing in the swivel ball. Use a blade to taper one end of the tube to make it easier to install.
Fan shroud is suitable for Mingda Magician series extruder. Shroud should be printed at least from PETG material, despite being close to the hot-end PETG works fine, does not deform. Uses a single 4020 Turbo fan. Fan is secured with a…
Mingda Magician X & Max (not Pro). SD Card Mount - Modular Quick Change accessories - The possibilities are endless https://imgur.com/a/k6bGzOF
Mingda Magician X LED top mount v11 https://imgur.com/a/TNXw41H https://www.facebook.com/groups/mingda3dprinter/posts/1537134786682134
Screen cover for Mingda Magician printers
Mingda Magician Series - Extruder Tensioning Screw ‘Knob’ … This is a larger knob/handle of my original design . V1 - Print this part and screw in a m3 x 30mm socket head cap screw into a recessed m3 hex nut (it may end up spinning, but…
These may interfere with the bulky stepper motor housing and ribbon cable if printing very tall objects. You can remix these any way you see fit just shout me out. Use organic supports for the small overhangs and at least 25% infill for…
This is a Mold for the Mingda D2 hotend Silicone socks. With this mold I tried a new approach compared to my previous mold designs. Usually the biggest issue was to get rid of the air bubbles in the closed mold designs. Therefore this…
Mingda Rock SKR3 Mount Original screws can be reused. For the controller fan you need 2 x 12mm m3 screws 2 x m3 nuts
I was looking at mounting a webcam in the sd card slots that the original design used, but liked the idea of being able to mount a case of some sort. So I extended the original base to add the camera mount, while still keeping the mount…
Simple camera mount for the Raspberry Pi Camera used along with OctoPrint. The bed stops before reaching the z-axis frame, so it doesn't get knocked.
Es wird 2x der SD dummy und einmal die Grundplatte benötigt. Einfach die SD dummys in die Grundplattte kleben und dann in die SD Halterung am Magician X stecken, fertig!
This is a light bar holder for an LED lamp I bought at Aliexpress. Link: https://a.aliexpress.com/_mKfLvn8 Printed on PLA. Used Fuzzy skin because I like it. No Supports, oriented so it doesn't need it.
It's time to upgrade your MINGDA Magician Series printer with the Ultimate Cooling Kit. I've been using this setup for more than a year now. Combined with the All Metal Heatbreak and V6 PT100 Alloy Block, this setup is a beast—I've…
I used PETG, but will work fine with PLA. I used 4 lines with 0.4 nozzle on the walls.
PFTE-Tube-Coupler that snaps on the runoutsensor of Mingda Magician series. When running with the originals Hotendhousing it is eventually necessary to cut out the opening. In my case i dont need it, because im not using the housing.…
Supporto interno per stampante Mingda D2 la staffa ospita due mosfet >…
Mounting bracket for the hotend on a Mingda Magician hotend. Best printed in higher temp filaments or Resin.
Babystep Endoscope tool ONLY FOR !!! MINGDA Magician X2 endoscope diameter 7mm Only 2g filament :) need m3 screw! Holder need to be clamp in correct ventilation holes !!! Picture is just sample! Use moving arm to fix distance!
I've had two instances where the 20-pin cable responsible for the x-axis gantry stuff fail on me, so I made this easy to print clip-on strain relief bracket. The short ended clip should be inserted at the top, and the bracket should be…
a stiffer version with 2 mounts from my lightholder https://www.printables.com/de/model/907128-lightholder-mingda-magician. Print upside down with supports, eventually use birm. alignment on the heatbead rotated 45 degrees so that it fits…
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, PCTG, ABS, GreenTec, GreenTec Pro or similar). New Version for…
quick one off to mount a wyze cam on a magician X, you can either use a dead sdcard, an extra card adapter, or the included blank. screw or glue. Category: 3D Printer Accessories
mine broke into several pieces. mingda had no replacement for it....made my own been working longer than the original. i made out of PLA Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: .15mm Infill: 50% Filament: generic…
Here you will find a practical filament trashcan for your MINGDA Rock 3 Pro printer. It attaches to the printer with two clips that prevent it from coming into contact with the print bed during printing. Small tabs on the clips prevent…
I've had two instances where the 20-pin cable responsible for the x-axis gantry stuff fail on me, so I made this easy to print clip-on strain relief bracket. The short ended clip should be inserted at the top, and the bracket should be…
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, ABS, GreenTec, GreenTec Pro or similar). New Version 2024-04-07:…
A 1/2 Extruder Cover . With more Skull . Print Settings Printer: Mingda D-2 Rafts: No **Supports:** Yes Resolution: 0.16 **Infill:** 25% Filament: Anything I can get my hand on cheap PLA Black Notes: I just put a 10mm support under the…
A 1/2 Extruder Cover . With more Skull . Print Settings Printer: Mingda D-2 Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Anything I can get my hand on cheap PLA Black Notes: I just put a 10mm support under the Skulls top…
Mingda D-2 extruder cover with integrated cablechain adapter Print Settings Printer: Mingda D-2 Rafts: Yes Supports: Yes Resolution: 0.15 Infill: 40% Filament: Anything I can get my hand on cheap PLA Black Notes: . Category: 3D Printer…
I was struggling while printing with TPU. The extruder was really pulling and stretching the filament. I needed less friction from the spool holder mount. I was already using one on a different printer and I liked how it worked. I remixed…
I am working on upgrading my Mingda Rock 3 Pro printer, and I wanted to have a BLtouch setup. Mingda has the holes setup and ready to install the bracket for the BLtouch, but I could not find a proper bracket anywhere so I created this…
EDIT: V2.0 uploaded 20220116 - added radii , larger finger pad, longer body, added ID info Here's a little 'fixture' for cutting the PTFE tube for Mingda V2 hot ends - It doesn't care how long in mm it needs to be. Just thread the metal…
This cover for extruder block, replace the original one when you'll put a 5015 fan. Print Settings Printer: Mingda D2/D3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: No matter PLA Black Category: 3D Printer Parts
After replacing the 4010 original fan with a 5015 fan, this fan duct will be indispensable! Print Settings Printer: Mingda D2/D3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: No matter PLA Black Category: 3D Printer…
condotto aria per raffreddare il pezzo l' aria arriva direttamente e in modo concentrato sul nozzle venite a trovarci sul gruppo facebook italiano https://www.facebook.com/groups/mingdaitalia/ air duct to cool the piece the air arrives…
This is just a simplified version of the X carriage (without the belt holders) intended for measurements and references only
Experimental adapter for attaching a voron style hot end to my mingda printers. While it will work, this was just a proof of concept and the part will melt within 15 minutes. I repeat don't use this unless you get the part machined from…
mingda magician print head shroud with all the excess bits removed for easier access to the crappy inside parts. this should still work for X, pro, or max. but not the x2, pro2, or max2. They stopped making non-industrial printers so if…
