1 / 4
Mingda Magician series Fan Shroud Duct (single 4020T fan) — zdjęcie 1
1 / 4

Mingda Magician series Fan Shroud Duct (single 4020T fan)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I've made a remix of Prusa MK3 fan shroud to fit the Mingda Magician series 1 extruder. Fan duct uses single 4020T fan.

Ocena
0 / 5
Polubienia
14
Pobrania
79
Wydruki
0
Wyświetlenia
547
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Fan shroud is suitable for Mingda Magician series extruder. Shroud should be printed at least from PETG material, despite being close to the hot-end PETG works fine, does not deform.

Uses a single 4020 Turbo fan. Fan is secured with a M3x25mm bolt on one side, on the other I used a single drop of superglue - can still be easily removed and replaced if needed.

Due to it's orientation you can also fit a bigger block V6-PT100 to the hot end. 

Beware, you'll need to adjust the fan speed and find the right amount of cooling for you needs.

Print with at least 0.2mm layer height and supports from the buildplate. 

It's an excellent cooling system upgrade!

Capture, build, design: Your support makes it real <3
Donation link: https://www.paypal.com/donate/?hosted_button_id=DLVG74XGXAY8S

Tagi