Label Printer Tape Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trays to store and organize Brother TZe tape and PT-E550W in an Apache 3800 Case
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use the provided bins to organize your Brother TZe tape and PT-E550W printer in an Apache 3800 protective case. 3800 size case chosen so printer can fit alongside ample tape storage. I store the charger underneath the printer itself.
"Vertical orientation" trays store tape cassettes on their edge vertically so you can view the ID label. Vertical trays accommodates any thickness/width TZe tapes as organization is provided through the use of removable dividers .
"Horizontal orientation" trays store tape cassettes flat. Horizontal trays are ~1.25" tall so tapes up to 24mm/0.94" thick will fit within the volume of the tray. However, there is no obvious reason that 36mm tape thickness would impede closing the lid.
Two (2) horizontal trays fit on top of two (2) vertical trays. Two levels of vertical trays will NOT fit in a 3800 case. Horizontal trays are included to add the extra 6 slots of storage. If you omit them, tapes in the bottom trays should not dislodge from their slot.
Print Notes
Bins are 246mm long. Confirm your build plate dimensions to ensure it will fit.
Bins are 98.5mm wide so two can be printed at once, side-by-side
Print Settings
Printed in PLA with a 0.4mm nozzle.
0.20mm layer height
25% infill, Gyroid
3 walls
3 bottom layers