Liczymy pasujące modele…
A bracket to hold the Brother E550W label printer (p-touch system) on an Ikea Skadis toolboard. Should be self-explanatory. Add two rubber domes at the back (bottom) for extra stability. Or edit the model to add a lip there.
Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge. On the hinge, enable “Supports on build plate only”. On the latch, I used paint-on supports…
Print in whatever you want, PLA+ is plenty strong and add whichever 2mm T-Nut design you like the best. Align the 3 T-Nuts with the slots in the Skadis board and then spin the machine screw heads to lock them in place.
Tested with Brother E550W, should work with similar models.
A bracket to hold the Brother E550W/PT-H500 label printer (P-touch system) on a Multiboard wall. Note: This will not work with the Brother P-Touch E560 which is slightly larger. You need two or four Multibuild Lite Fix Points to attach…
Printed using PETG, but any material should be fine. You'll need a little bit of flex to get the latch onto the corresponding pins of the hinge. On the hinge, enable “Supports on build plate only”. On the latch, I used paint-on supports…
A bracket to hold the Brother E550W/PT-H500 label printer (P-touch system) on a Multiboard wall. Note: This will not work with the Brother P-Touch E560 which is slightly larger. You need two or four Multibuild Lite Fix Points to attach…
