Keyboard Display Stand (4-5 Keyboards, 16 USBs)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keyboard stand for 4-5 keyboards. Inspired by Clackify's version.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created my own keyboard stand model from scratch taking inspiration from Clackify's design, that fits within the print dimensions of the Core One L.
Features of this design:
Three ~150mm deep layers with ~50mm space between each layer
One ~150mm deep layer with open access above
One ~105mm deep pass-through pocket with ~40mm space
Total of sixteen USB 3.0-sized pockets for dongles, storage drives, cables, etc.
Design notes:
Overall bounding box is ~285mm tall, 277mm front to back, 110mm side to side. Additional relevant and precise dimensions are included in the photos.
Print in photos was made in Bambu Labs Dark Blue Matte PLA using attached .3mf file.
0.40 HF nozzle
0.28 layer height
3 perimeters
5% Gyroid infill
Total material used in attached .3mf is about 900g; make sure a new or very fresh roll is used with this model!
I would recommend adding rubber feet to the bottom face and cork to the layers to increase friction between parts.