Dual Laptop & Tablet Mount — Wall or Under-Desk | 14" & 16" Variants
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dual laptop/tablet holder for your table or wall for keeping your desk tidy. 14" and 16" size variants.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend asked if I could help design a solution for his home docking problem — 1 personal, 1 work laptop, with either being docked to the same setup at different points of the day. So, this is the solution I came up with. It's pretty generic, so it should also work with tablets and as a storage solution.
Four variants: 14" and 16" sizes, each in two mounting configurations — flush under-desk (devices sit level with the table edge) or wall-mounted. Each slot is secured with 2 screws, the mount itself takes 2 more — 4 wood or drywall screws total.
The slots flex to hold devices firmly. The lip at the top is 14.2mm, and below it opens to 20.2mm, so it should accommodate most laptops. I included a "Test Fit Print" — a small piece you can print to check your laptop fits before committing to the full print.
Works with MacBooks, Windows ultrabooks, iPads, Surface tablets, and most slim-profile devices at the listed sizes.
Print Settings
Material: PETG or ASA
Supports: None
Orientation: Print on its side (either face down)
Infill: 30%
Walls: 4
Happy printing!
Like what I do and want to support me? Buy me a coffee!