1 / 6
Dual Laptop & Tablet Mount — Wall or Under-Desk | 14" & 16" Variants — image 1
1 / 6

Dual Laptop & Tablet Mount — Wall or Under-Desk | 14" & 16" Variants

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A dual laptop/tablet holder for your table or wall for keeping your desk tidy. 14" and 16" size variants.

Rating
0 / 5
Likes
6
Downloads
26
Makes
0
Views
269
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

A friend asked if I could help design a solution for his home docking problem — 1 personal, 1 work laptop, with either being docked to the same setup at different points of the day. So, this is the solution I came up with. It's pretty generic, so it should also work with tablets and as a storage solution.

Four variants: 14" and 16" sizes, each in two mounting configurations — flush under-desk (devices sit level with the table edge) or wall-mounted. Each slot is secured with 2 screws, the mount itself takes 2 more — 4 wood or drywall screws total.

The slots flex to hold devices firmly. The lip at the top is 14.2mm, and below it opens to 20.2mm, so it should accommodate most laptops. I included a "Test Fit Print" — a small piece you can print to check your laptop fits before committing to the full print.

Works with MacBooks, Windows ultrabooks, iPads, Surface tablets, and most slim-profile devices at the listed sizes.

Print Settings
  • Material: PETG or ASA

  • Supports: None

  • Orientation: Print on its side (either face down)

  • Infill: 30%

  • Walls: 4

Happy printing!

Like what I do and want to support me? Buy me a coffee!

Tags