1 / 1
Gear Wyrm - Print-in-Place Captive Fidget Chain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One-piece print-in-place gear fidget chain with captive joints.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A one-piece print-in-place gear fidget chain with captive joints. The links are designed to print together on the bed, then flex after printing without needing assembly.
The joint design uses trapped spool-style pins inside closed sockets, so the pieces are meant to stay captive and not fall apart during normal use.
Print notes:
- Print flat on the bed.
- Use 0.2 mm layer height.
- No supports.
- PLA recommended.
- After printing, gently free each joint before bending hard.
