1 / 1
Gear Wyrm - Print-in-Place Captive Fidget Chain
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One-piece print-in-place gear fidget chain with captive joints.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A one-piece print-in-place gear fidget chain with captive joints. The links are designed to print together on the bed, then flex after printing without needing assembly.
The joint design uses trapped spool-style pins inside closed sockets, so the pieces are meant to stay captive and not fall apart during normal use.
Print notes:
- Print flat on the bed.
- Use 0.2 mm layer height.
- No supports.
- PLA recommended.
- After printing, gently free each joint before bending hard.
