Tool-free 12mm automotive body clip - works with Honda V6 air intake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No tool needed! Push in, pop out plugs to secure frequently removed automotive parts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
In vehicles like the V6 Honda Pilot or Honda Odyssey, the air intake can be removed to access the battery, fill the oil, replace a headlight lamp, etc. Try this substitute for the original body clip for 12mm holes - push in to secure, pull out by the comfortably large handle to remove.
Example printed in Sainsmart translucent red TPU 95 with 15% infill and 2 perimeters. Photo shows a 2nd Generation Honda Pilot. It's gone straight through summer with no problems.
The STL prints a single pop-in clip.
The 3MF file is a PrusaSlicer project that prints two clips and a connecting strap together, making your clips easier to see and harder to lose.