CLASSIC WIND CHIMES
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
wind chime designed with optimized tube wall thicknesses for acoustic performance and durability
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for outdoor durability and acoustic clarity, this model is created for the wind chimes contest. Optimized for functional use. The geometry utilizes PETG filament properties to balance structural rigidity with harmonic resonance.
Print Settings
Material: PETG (a mix of materials and colors would likely look / sound great)
Infill: 15% - 20% Gyroid or Adaptive Cubic
Layer Height: 0.20mm
Perimeters: 3 (alternate extra) walls for added strength against the wind
Supports: None required for the hanger, striker, and bottom wind catch.
Assembly & Tuning Instructions
Hanger: Suspend the main structure using a durable cord through equally threaded to each three external holes.
Tubes (TUBE 1, TUBE 2, TUBE 3): Thread the hanging strings through the top hanger and attach the tubes with even spacing. Adding tubes - scale extra tubes and hang them around.
Striker & Wind Catch: Tie the striker directly down center, and attach the bottom wind catch below the striker.
Notable Note: pictured i hung the top string to suspend centered, but equal length to each three outer points is better balanced
Next Steps - I want to print PETG CF and see if the sound is different.
Extra Goal - Would be really cool to print from nylon cf or similar - ideas?