Mini Tower Computer Stand for 160mm Wide PC or Thinner (No Supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A robust desktop computer stand. No supports are needed for this print, for computers 160mm wide or less.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a computer stand. It prints without supports, provided your printer is fast (250mm/s or more). I created this model because my computer was pulling in too much dust as it used to be on the floor.
I'm using it with my Lenovo E73 MT case which is 160mm wide. You can use it with similar cases.
- PLA, PETG or ABS
- 0.2mm layer height
- 15% infill
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.