50mm Suspender Hook (Puzzle-lock)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement hook for 50mm suspenders. Designed to prevent sharp metal buckles from damaging car seats.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Replace your sharp or broken metal suspender buckles with this plastic hook. Perfect if your original buckle is tearing up your car seats or if it has snapped and you need a quick fix to avoid standing with your pants at your ankles and your "valve" exposed.
Two different sizes: 25 and 12mm bottom hook
It features a "puzzle-lock" mechanism to ensure the strap stays securely attached to the hook.
Installation: Simply cut off the original metal buckle and slide this replacement onto the strap. For extra security, a drop of superglue can be applied to the puzzle-lock.
Print Instructions
Material: PLA works well, but any rigid material is fine.
Perimeters: 8 (for maximum strength).
Top/Bottom Layers: 8.
Tolerances: The puzzle-lock has a tight 0.15 mm gap. If the parts fuse slightly during printing, they can usually be snapped or tapped apart with a little force without affecting functionality.