XRAY T4 17-19 30MM ADJUSTABLE FAN MOUNT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Brenton Baxters design (see Remixes down below for a link) for an adjustable fan mount for the T4…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a remix of Brenton Baxters design (see Remixes down below for a link) for an adjustable fan mount for the T4 series of cars (2017-19). I didn't have any 40mm fans handy so I redrew it to accommodate a 30mm fan.
There are two versions of the stl, one has a little cut out at the top so it misses the motor wires. My HobbyWing motor had the wires at the top so this version clears those.
I took the original STL of the 40mm version, loaded it into Fusion 360 as a mesh and then started creating the three different 2D sketches. When I was happy with those I extruded it and added fillets, and a hole opposite the mounting bracket so you could put a screwdriver through. This saves you the hassle of trying to tighten the fixing screw at an angle before mounting the fan.