Weber 38 Spacer for Carb Cheater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yes you can print it, it won't melt!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
First of all: Print with PA6-CF!!! It won't be affected by engine heat and is surprisingly easy to print (P1P). Just retighten it after the first heat cycle.
This spacer is meant to be used with a Carb Cheater. The ports are designed to angle slightly downward in the direction of flow (so mount it in the right way). The combined area of the individual ports equals the inner area of a 3/8" hose.
I used a brass pipe fitting from Aliexpress (10mm Barb, 1/2"), that's why the spacer had to be 25mm high. If you want to use another fitting you can edit the file without the thread and put your own thread in or press fit the fitting.