Wire Assembly.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wire Assembly and cover for 110/230V AC.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Wire cover and assembly. For outdoor wires for garden tools such as lawn mowers. If you cut the cable, you can use this to assemble cable again.
The assemble consists of two models that both need to be printed twice.
The current model is for wire with Ø 6-6.5mm diameter. For others size you can scale the models according to this table.
Diiameter Ø | Scaling Factor |
|---|---|
5mm | 77 |
6mm | 92 |
6.5mm | 100 |
7mm | 108 |
8mm | 123 |
9mm | 135 |
On the picture here, after wires has been soldered and protected with shrink tubes, additional silicone is added to ensure water will not enter the assembly. You may use glue or similar too, but silicone is best.
IT IS IMPORTANT TO SEAL THE ASSEMBLY FOR CABLES USED OUTSIDE. PLEASE USE SILICONE FROM TUBE OR ALIKE.