Unifi UTR Thermal Spacer Plate (v1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,46 € – 0,57 € netto (bez VAT)
Dla pliku: Unifi Travel Router (UTR) Thermal Spacer Plate v1_0.4n_0.2mm_PETG_COREONE_31m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,51 € netto (środek widełek).
- Masa podana przez autora
- 7 g
- Czas druku podany przez autora
- 30,6 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Reduces temperature between the UTR & another surface or device. Port profiled cuts, 3mm air gap & band guides (v1)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
v3 now released, get it https://www.printables.com/model/1713127-unifi-utr-thermal-spacer-plate-v3">here. It has even more ventilation but needs supports when printing.
v3.1 also released for those of you who have a UGreen Nexode PB763/PB761 10000mah powerbank (as per one in the photos), get that custom one <a target="_blank" rel="noopener nofollow ugc" class="editor-link relative pointer-events-auto a cursor-pointer
underline " href="https://www.printables.com/model/1713133-unifi-utr-thermal-spacer-plate-v31-ugreen-nexode-e">here.
This v1 model will be removed in the coming weeks as it's inferior........
This is v1 of the model. More robust, no need for supports.
Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up
Ventilated underside design promotes air circulation
Helps maintain lower operating temperatures during sustained use
Designed for use between travel routers / compact networking gear and power banks
Lightweight, low-profile form factor adds cooling without bulk
Precision-fit footprint for stable placement and reduced wobble
Ideal for portable setups, travel rigs, and always-on devices
Optimized for 3D printing with common materials (PLA, PETG, etc.)
Simple, durable design with no assembly required, no supports required either.
Powerbank in photos is UGREEN Nexode Qi2 10,000mah, PB763 is the model number.
v1 (this model): I used PLA, the temperature readings I get on the UTR is 42°C on the screen. 42.4°C hottest spot on top, and 45.6°C max on the bottom when using the model.
v2: I used PLA, the temperature readings I get on the UTR is 40.2°C on the screen. 41.1°C hottest spot on top, and 42.6°C max on the bottom when using the model.
PETG would be ideal if your temps are too close to 50-60°C.