MSI Suprim X GPU Noctua fan spacer ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Noctua NF-A9x14 fan spacer ring for MSI Suprim X RTX 3080Ti
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a spacer ring for tightening the gap between the shroud and the NF-A9x14 when modded onto an MSI RTX 3080Ti Suprim X. STEP file is provided for you to modify to fit your needs. The profile is taken directly from the CAD files published by Noctua with slight adjustments to better fit reality.
There are two files, one for the two rear rings and the other for the front ring (connectors being the front). If you look, there are tabs on the shroud to screw it to the heatsink that are placed differently. The models have little bridges to accomodate for these tabs.
Removal of the ring can be done via the 2 2mm holes on each side, using an L shaped tool (like a small allen key) to pull up and out.
Printed in PETG with tree supports and pressure fit in shroud.
Mount: