2.2 beadlock rim (inspired by Black Rhino Armory)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a beadlock rim inspired by the Black Rhino Armory rims.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a beadlock rim inspired by the Black Rhino Armory rims (https://www.blackrhinowheels.com/black-rhino-hard-alloys-armory) for 2.2 rc tires.
The rim is 33 mm wide and can be used with a wide range of SLW hubs (Injora, SSD, etc.). A 3D printed SLW hub is included to get you started ;-)
The front and back are held together with M2x8 screws. The hub cap also mounts with M2x8 screws and M2 nuts.
There's a front part with fake bolts and one with holes for M2 screws for decoration.
I've included a 3D printed clamping tool (uses M5 bolt and nut) to faciliate the assembly.
Photos show the rims mounted on my 3D printed Unimog from Jessecad (https://cults3d.com/en/3d-model/game/umg-4-trx-cs).