1 / 7
2.2 beadlock rim (inspired by Black Rhino Armory) — image 1
1 / 7

2.2 beadlock rim (inspired by Black Rhino Armory)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a beadlock rim inspired by the Black Rhino Armory rims.

Rating
0 / 5
Likes
6
Downloads
16
Makes
0
Views
127
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a beadlock rim inspired by the Black Rhino Armory rims (https://www.blackrhinowheels.com/black-rhino-hard-alloys-armory) for 2.2 rc tires.

The rim is 33 mm wide and can be used with a wide range of SLW hubs (Injora, SSD, etc.). A 3D printed SLW hub is included to get you started ;-)

The front and back are held together with M2x8 screws. The hub cap also mounts with M2x8 screws and M2 nuts.

There's a front part with fake bolts and one with holes for M2 screws for decoration.

I've included a 3D printed clamping tool (uses M5 bolt and nut) to faciliate the assembly.

Photos show the rims mounted on my 3D printed Unimog from Jessecad (https://cults3d.com/en/3d-model/game/umg-4-trx-cs).