Longer LK5 PRO Top Spool Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A top-mounted spool holder designed specifically for the Longer LK5 Pro. This mount relocates the filament spool to the
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Directions:
Insert both M5 Nuts into the back where the spool will be attached.
Insert the 2 M5 Bolts through the stock spool mount and thread them through the whole on the slanted side until snug with the nuts previously inserted.
Insert 2 M3 T Nuts into the rails at the top of the printer by removing the 2 M5 Bolts that hold the side rail and diagonal support stick.
Finally, screw the 2 M3 Bolts into the top of the 3D printed mount and thread until snug.
Extra Materials:
2x M3 T-Nuts
2x M3x15 Bolts
2x M5 Nuts
2x M5x25 Bolts
I got an extension cable for the stepper motor from Amazon:
https://amzn.to/4dn3gRV