Longer LK5 PRO Top Spool Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A top-mounted spool holder designed specifically for the Longer LK5 Pro. This mount relocates the filament spool to the
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
Directions:
Insert both M5 Nuts into the back where the spool will be attached.
Insert the 2 M5 Bolts through the stock spool mount and thread them through the whole on the slanted side until snug with the nuts previously inserted.
Insert 2 M3 T Nuts into the rails at the top of the printer by removing the 2 M5 Bolts that hold the side rail and diagonal support stick.
Finally, screw the 2 M3 Bolts into the top of the 3D printed mount and thread until snug.
Extra Materials:
2x M3 T-Nuts
2x M3x15 Bolts
2x M5 Nuts
2x M5x25 Bolts
I got an extension cable for the stepper motor from Amazon:
https://amzn.to/4dn3gRV