IKEA STENKOL Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store the IKEA STENKOL battery charger along with 24xAAA and 15xAA batteries. Insert batteries upside-up or down.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
❤ If you like this model, drop a like to support my 3D printing addiction (er... I mean hobby)!
Store the IKEA STENKOL battery charger along with 24xAAA and 15xAA batteries. Insert batteries upside-down to remember which ones to charge.
The case keeps all batteries level, and is designed to accommodate a lid should you wish to make one. EU, UK, and US versions of the STENKOL charger go into the slot toward the end.
The print has long flat sections, so I've also built in anti-warping features. In the glass view, you can see a <0.5 mm wide channel running around the box on the inside. It covers the uneven expansion and cooling of layers inside the box while printing, preserving a flat outer wall. This is known as a Benchy hull line mitigation. Additional channel under the AAA battery section runs perpendicular to the case length-wise to break up tension lines there, too. If you still see a hull line, try adding a little bit of fuzzy skin.
Not affiliated with, authorized, sponsored, or endorsed by IKEA. "IKEA" and "STENKOL" are trademarks/trade labels of their respective owners, used here only to indicate product compatibility. Design created from scratch, provided "as is," with no warranty of any kind. Use at your own risk.