Rack Ears for JOYJOM Open Air PC Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed rack ears for mounting an open-air PC frame in a standard 19" rack. (JOYJOM case on amazon)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 377
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These rack ears allow you to mount this Open Air PC Case(https://www.amazon.com/dp/B0DPKL7GQ8) in any standard 19" equipment rack using standard cage nuts if you so desire, though I recommend using rack studs if you need new hardware .
Simple two-piece design — print, attach, rack it.
Notes:
There are two versions: One version with only the top and bottom mounting holes available, and the other for all 9 mounting holes if you want that for some reason. - Print one Left ear and one Right right ear. The number in the file name corresponds to the number of rack mounting holes available in the part.
The mounting holes for the chassis are designed to match the specific case linked above. There may be others with the same mounting hole configuration, or theoretically you could drill new holes in your case to use this part.
Hardware needed:
EITHER: Rack Studs (https://www.rackstuds.com/products/series-ii)
OR: Standard rack cage nuts + screws (M6 or 10-32 depending on your rack)
Print settings:
Material: PETG, ASA or ABS recommended
Infill: 15%+ recommended
Supports: not needed. Orient as the file as they are uploaded (triangle flat on the build plate)
Designed as a prototype for a sheet metal version — check the companion video to see the full design process and sheet metal redesign.
come visit us on youtube: https://www.youtube.com/@Proto_Squirrel
or at our website: https://protosquirrel.com