Ryobi PCL001 Compressor Replacement Fan (Motor Cooling Fan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement cooling fan designed for the Ryobi PCL001 portable compressor. The original fan in my unit failed,
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Description:
This is a replacement cooling fan designed for the Ryobi PCL001 portable compressor. The original fan in my unit failed, so this model was created as a direct-fit solution to restore airflow over the motor.
The fan mounts onto the motor shaft inside the compressor housing and helps maintain proper operating temperature during use. It is sized to fit within the limited internal clearance and works with the existing shroud and airflow path.
Compatibility:
Ryobi PCL001 portable compressor
May fit similar Ryobi models using the same motor/fan layout (not verified)
Notes:
Designed based on measurements from a disassembled unit; tolerances are tight
Ensure proper orientation during installation (airflow direction matters)
Check shaft diameter and fit before final assembly
No hardware required if press-fit works as intended
Print recommendations:
Material: PLA or ABS
Layer height: 0.12–0.2 mm, border 0.2
Orientation: Flat on the build plate
Disclaimer:
Use at your own risk. This part is installed in a rotating assembly—improper print quality or imbalance may cause vibration, noise, or damage. Always test at low speed first.