HD Canopy Adapter for Happymodel Mobula8 (BETAFPV Micro Canopy)

Description

This is a small two-part TPU adapter that lets you use the BETAFPV Micro Canopy for HD Camera on the Happymodel Mobula8 frame.

The canopy was originally meant for the old Meteor85 frame (which is no longer available), but it fits HD nano cameras like Walksnail, DJI and similar perfectly and is very strong.
With this adapter you can keep using that canopy and mount it cleanly on the Mobula8 instead of the Meteor frame.

The adapter is designed directly around the Mobula8 2S frame, so the fit is very precise. I am using it myself on a 2S Walksnail build and so far I have not managed to break it in crashes.

Each mount consists of:

• a lower block that fits snugly into the Mobula8 frame

• a thin top plate that clamps the canopy and distributes the load from the screws

In total you need three of these mounts to secure the canopy.

Hardware

You will need:

• 3 × TPU adapters

• 6 × M1.4 × 5 flat head screws with integrated washer

  • I got mine from AliExpress (https://a.aliexpress.com/_ExcWG40).

• Frame: Happymodel Mobula8 (2S)

• Canopy: BETAFPV Micro Canopy for HD Camera (HD nano camera canopy)

No additional spacers or parts are required.

Printing recommendations

• Material: TPU (I used leftover TPU, Shore hardness wasn’t critical – a medium firmness works well)

• Perimeters / Walls: 4 perimeters

• Supports: not required (model is designed to be printed without supports)

• Printer: originally printed on an older Flashforge Creator Pro with a fine profile – so most modern printers should have no issues.

Orientation:
Place the adapter on its flat bottom surface so that the screw holes print vertically. This gives the best strength around the screw area.