KIA AddGear mount for Apple Watch 44mm

This mount for the Apple Watch 44mm is fitted with an AddGear anchor, allowing it to be installed in a compatible car (e.g. KIA PV5) into the AddGear system to the left of the steering wheel. To charge the watch, a charger can be fitted and connected via the socket in the left-hand storage compartment (USB-C).

I have created two versions: the first is suitable for the standard Apple Watch charging cable (approx. 27.7 mm diameter and approx. 8 mm thick with a USB-C connector), and the second for this charging pad (https://www.amazon.de/ dp/B0DJ6M87PN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 Model: ALBS-WA88), to which both USB-C and Lightning cables can be connected; naturally, the other end must have a USB-C connector to allow it to be connected to the car.

I deliberately designed the anchor to be inserted separately so that it can be printed flat, allowing for a very sturdy print thanks to a high wall thickness (I recommend a perimeter of 6 or 7). The starting point for this anchor was the original STL file from KIA for the AddGear system, which can be found here: https://www.kia.com/kr/customer-service/kia-members/kia-addgear/development-ecosystem. I printed the first model (Standard Apple) using PETG GF (here, with the anchor lying flat, the fibres are exactly perpendicular to the force) supported with PLA on a Prusa XL (see print file) with 0.6 nozzle. The second model (ALBS-WA88) was printed using ASA on a Bambu P1S. I’m curious to see which one performs better in the car ;-).