Steindorff L1100 Microscope LED Conversion Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom base for converting Steindorff L1100 microscope to LED using PD power and LM317 regulator.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom bottom panel designed to convert a Steindorff L1100 microscope from a traditional lamp to a modern LED lighting setup.
The design integrates power control and mounting features to make the conversion clean and modular.
Features:
Slot for USB-C Power Delivery (PD/QC3.0 trigger) module like this:

M3 threaded inserts (4 mm height) mounting area for LM317 adjustable linear voltage regulator like this:

Dedicated mount for the original C4 lamp holder (i used 12V LED lamp)
Ventilation slots for heat dissipation
Uses stock legs and slock screws to mount
Disclaimer:
This is a DIY electronics modification. Use at your own risk and ensure proper wiring and heat management.