Ayn Odin 3 Cover/Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case/Cover for the Ayn Odin 3.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 862
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
We have a case for the Ayn Odin 3. Protects the triggers. Cutouts for the USB-C and a cutout to help pull the device out of the case.
You fit it on by sliding the top in first, then pushing down on the bottom.
How to Print
Print face down.
Supports are needed on the overhang near the top. I have a little indent where the supports can land so there's no chance of left over support scratching your screen.
Advice
Might be loose as is, but won't fall out. I suggest adding 1mm Felt Tape to the sides for a more snug fit.
You can find that here: https://www.amazon.com/dp/B0BFQ7RHCY
Alternatively, in a pinch, using a few layers of tape on the sides would probably get the job done.
Links
Prints are free, I'll always appreciate the coffee money: https://ko-fi.com/donutsatwork
Also taking requests, feel free to bug me at @donutsatwork#3901 on Discord.