Ayaneo Pocket Ace Case/Cover Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ayaneo Pocket Ace Cover/Case with Grip
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
We have a grip/case for the Ayaneo Pocket Ace. You can also use the USB-C cutout to help push the device out if it's snug.
Tried to keep it relatively slim otherwise but still having some place to hold on to.
How to Print
Print vertically.
Some supports on the bottom left and right might be needed. I don't think it's necessary, but the overhangs might be a bit rough. Doesn't affect functionality.
Advice
Might be loose as is, I suggest adding 1mm Felt Tape to the sides for a more snug fit.
You can find that here: https://www.amazon.com/dp/B0BFQ7RHCY
Alternatively, in a pinch, using a few layers of tape on the sides would probably get the job done.
Links
Prints are free, I'll always appreciate the coffee money: https://ko-fi.com/donutsatwork
Also taking requests, feel free to bug me at @donutsatwork#3901 on Discord.