Core One HULA Anti-Vibration Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short legs for the Core One/+ designed to work with the HULA anti-vibration feet.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 98
- Wydruki
- 7
- Wyświetlenia
- 1774
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Core One legs with adapters for HULA anti-vibration feet
Inspired by Prusa core One feet v2 squashball version, these are remodeled to use an adapter to link the legs to a set of HULA anti-vibration feet.
I Printed them in PETG-GF with 3 walls and 15% adaptive cubic infill. Any non-PLA material should be fine, though you will want to make sure you are well calibrated for materials with high shrinkage like ASA/ABS.
Supports required.
You will need 2 M3 screws for each leg to be mounted to the frame. One of the machine screws (M3x8) in the frame is used to index the center channel at the top of the leg to keep it from moving, while the other (M3x16) is used to attach the leg to the frame. The rest of the machine screws are for mounting the adapters to the bottom of the leg.
BOM:
4 M3x8 (1 per leg in the frame for indexing)
8 M3x10 (2 per leg)
4 M3x16 (1 per leg to the frame)
8 M3x5x4 heatset inserts (2 per leg)