1 / 3
Micron+ R1 Ducted Fans & Catchers — zdjęcie 1
1 / 3

Micron+ R1 Ducted Fans & Catchers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A lot of ducting to maximize chamber heat plus some bonus catchers to keep the floor of your printer looking nice.

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Ducting for the bed fans and some catchers for junk falling off the bed.

Print one of each duct and deflector. The right duct will require support. The deflectors will require support for the tabs that go in the extrusion. Everything should print as oriented in STL.

Optionally, print 2x guides for more ducting.
Optionally, print each of the buckets for full floor coverage (when combined with a poop bucket such as this or kyle's original)


Print 4x of the pins from deeznuts 



Put in the printer. Heat up faster. Reference the cad for assembly and the like https://cad.onshape.com/documents/7c9eb4f6e63a13d70318f7c6/w/68464fbe15d6b505604a6e71/e/20c57092ab1a63556974eeae?renderMode=0&uiState=69faaad19530226670d0b1fc

Tagi