Micron+ R1 Ducted Fans & Catchers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lot of ducting to maximize chamber heat plus some bonus catchers to keep the floor of your printer looking nice.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ducting for the bed fans and some catchers for junk falling off the bed.
Print one of each duct and deflector. The right duct will require support. The deflectors will require support for the tabs that go in the extrusion. Everything should print as oriented in STL.
Optionally, print 2x guides for more ducting.
Optionally, print each of the buckets for full floor coverage (when combined with a poop bucket such as this or kyle's original)
Print 4x of the pins from deeznuts
Put in the printer. Heat up faster. Reference the cad for assembly and the like https://cad.onshape.com/documents/7c9eb4f6e63a13d70318f7c6/w/68464fbe15d6b505604a6e71/e/20c57092ab1a63556974eeae?renderMode=0&uiState=69faaad19530226670d0b1fc