Voron 0 Rainbow On a Matchstick Baffles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron 0-0.2 rainbow on a matchstick baffles - don't get blinded by the light :)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The popular PCB LED strips are excellent for lighting the small Voron chamber, but when mounted directly they tend to blind anyone trying to watch a print in progress. The baffles I designed prevent this by blocking direct glare when viewing the printer from the front or from roughly 45° to either side. They mount directly on top of the LED PCB using the original 1515 brackets. The only required change is to use M3×8 bolts instead of M3×6.
Each baffle can be printed individually on the Voron 0, as long as you still have full X and Y travel. The model measures 119 × 119 mm when rotated 45°.
When installing, make sure the orientation is correct: “Right” goes on the right side of the printer when viewed from the front.