Large Heavier Duty Pencil Case, with Steel hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Michael Fanta's excellent design, but remixed with a thicker shell and using steel pins (3 x 26) for exterior hinges.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is derived from Michael Fanta's 24 pencil design, but remixed to use 3mm x 26 mm steel pins for the hinges as well as the latches. The exterior shells have also been made twice as thick (large face only).
Print both part of the exterior shell. Fit them together in the closed position, then press a 3mm x 26mm steel pin into each hinge. Fit the (2) latches in a similar manner. Carefully insert pins into the receiving position for the latches on the bottom shell.
I hope you find this useful!