1 / 3
Large Heavier Duty Pencil Case, with Steel hinge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Michael Fanta's excellent design, but remixed with a thicker shell and using steel pins (3 x 26) for exterior hinges.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
This is derived from Michael Fanta's 24 pencil design, but remixed to use 3mm x 26 mm steel pins for the hinges as well as the latches. The exterior shells have also been made twice as thick (large face only).
Print both part of the exterior shell. Fit them together in the closed position, then press a 3mm x 26mm steel pin into each hinge. Fit the (2) latches in a similar manner. Carefully insert pins into the receiving position for the latches on the bottom shell.
I hope you find this useful!