Key fob Enclosure for Honda 2006-2012 Vehicles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A no screws, minimal support replacement housing for 2006-2012 style Honda key fobs
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTICE: This has been tested with a 8th gen Honda Accord. Only vehicles using a similar keyfob will work.
A replacement enclosure for Honda key fobs that requires no screws and has built-in, custom supports for easy assembly and printing. This design is intended to work for vehicle models built around 2006-2012 that have the transponder chip built into the electronics housing. Please confirm your make and model is compatible with this design before fully disassembling your keyfob.

Features
Key blade surrounded by a solid enclosure to prevent housing from splitting
Alternate faceplates for 3 vs 4 button style fobs
Optional Honda logo housing
Slot and peg design to prevent disassembly during use
100% 3D printed
Custom supports for quick and easy printing
Printing
A premade .3mf file is provided for quick setup and printing. Separate .stl files are provided if using a different slicer. For best print quality and assembly, the followings settings are recommended:
Filament | PLA+ |
|---|---|
Layer Height | 0.16-0.20mm |
Wall Generator | Arachne #required to print custom supports |
Wall Count | 3-4 |
Infill | 15-20% |
Credit to sweatypalmer on Thingiverse for inspiration