1 / 2
CYGOLITE Tail light mount for 50mm Bike Rack Bolt Pattern — zdjęcie 1
1 / 2

CYGOLITE Tail light mount for 50mm Bike Rack Bolt Pattern

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounts various CYGOLITE tail light models to a standard 50mm rack mounting point.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a basic taillight mount for off-the-shelf Cygolite models frequently used by commuters and bikepackers. After 6 months of testing on several bikes, I am only using the low-profile sideways configuration. This keeps the top of the rack functional. This was also designed to work with my mini-fender project that keeps the tailight clean. 

Mounting Hardware: It is designed for 4mm sockhead cap screws. I would recommend placing a nylock nut on the backside. 

Printing: The part is designed around a .6mm nozzle. The live spring component requires a resilient material like ASA or similar. I would avoid making this part from a GC of CF material. Support are built into the STL file. The part MUST be printed in the exact orienation in the STL or the live spring will fail. 

It may help to "relax" the live spring slightly be heating with a heatgun or lighter and depressing to the spring stop. I was able to depress the live spring several hundred times to failure with ASA, and unlimited after the heatgun treatment. 

Tagi