1 / 1
AT2020 Horizontal Monitor Mount — zdjęcie 1

AT2020 Horizontal Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Horizontal AT2020 mount that clips to the top of a monitor.

Ocena
0 / 5
Polubienia
4
Pobrania
5
Wydruki
0
Wyświetlenia
92
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

A bracket that clips onto the top of a monitor and holds an Audio-Technica AT2020 horizontally above it. Fits monitor edges up to 14 mm thick. No hardware required. Comes in two variants depending on which side you want the cable to exit: left port hole or right port hole. STEP files included for adjusting the clip width to fit thicker monitors.

Print settings

  • Material: PETG

  • Layer height: 0.25 mm

  • Infill: 20%

  • Orientation: Standing

  • Supports: Required for the top ring and top bracket

Modifying for thicker monitors

Open the clip body STEP in your CAD tool of choice and widen the slot to match your monitor's edge.

Tagi