23 modeli
This is a microphone stand I made for my roommates AT2020 to sit on his desk under his monitor. I used a variable layer height to print this, ensuring good resolution for the threads and a faster print time on the base.
A very quickly thrown together working shock mount, made for the AT2020 but you can remix the f3d file to match your own needs! Use rubber bands/o-rings/paracord or whatever you have for connecting the inner and outer ring. Print middle…
Printed biggest side flat, to be used with my remixed low profile arm for use with Low Profile Mic Arm: https://www.printables.com/model/1050464-sturdier-low-profile-mic-arm
I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…
This is a custom-designed desk stand for the Audio-Technica AT2020 cardioid condenser microphone. The stand provides a stable and compact solution for desk use, making it ideal for recording, streaming, or video calls without needing a…
so I needed an end to hold a shock mount for a mic I have. so I modeled this up. made it so you can just use a 20mm M4 bolt with a nut on the other side Printed on an Sovol SV06 plus Supports used on the overhanging end My printing…
Parts Store bought IKEA Tertial Lamp - 10$ M3x12mm Bolt (16x) - 1$ M3 Nut (18x) - 1$ M3x25mm Bolt (2x) - probably free? 2mm Steel wire - 5$ 3D Printed Parts 4x Mic Mount Feet 4x Outer circle feet 1x Mic Mount 1x Outer Circle Print…
The model consists of three parts, the “cup”, where the microphone sits, the “legs” which connect to both the cup and the stand, and the stand, which holds the legs in place. Can be assembled easily, you need m3 screws - they should self…
Hi there! Some time ago I had a problem with AT2020 when I want use for it an old pop filter which came with my previous microphone (Neweer). I decide to print some small add-on which give me possibility to mount old pop filter directly…
I don't use the microphone often, but I don't take it off the stand. To prevent dust from settling, I made a simple cover. I printed this in vase mode with PLA. Now dust doesn't settle on the microphone mesh when I'm not using it.
This is one of the first multi-part things that I've designed so honest feedback would be appreciated! This Mount requires the following Hardware: -1x M5x10 Screw -1x M5 Nut (abt. 4mm thick) -2x M3x6 Screws -2x M3 Nuts (abt. 2,5mm thick)…
Upgrade your audio setup with this custom-designed mount for the Audio-Technica AT2020 microphone. This mount securely attaches a pop filter directly to the microphone’s stand mount, eliminating the hassle of adjusting heavy gooseneck…
The AT2020USB+ microphone is quite nice, but the way the USB cable is unsupported hanging out the bottom bothered me, as it could easily get knocked and break the port/cable. So, I designed this support to reinforce the cable entry, and…
I bought a used AT2020, but part of the mount was missing. This mount has a 3/8" thread, and you will need a M6 bolt + nut to fasten the mount. I also needed to remodel the collar which fastens the bottom of the microphone, which is…
Mount for a pop filter on an Audio Technica AT2020 or AT2020USB which fits between the microphone and the included screw on stand mount. Simply unscrew the pop filter from its included mount and clamp it around the post. It prints…
2 part mic stand for AT2020, Don't have to use supports, just ramp up the cooling to max. Print the base upside down with PLA/PETG, Print the mic holder with 95A TPU,
50mm Microphone Holder for AT2020-USBX that attached to 1/4-20 male thread used on Amazon Supplied Magic Arm. Designed to use in conjunction with my monitor Vesa mount. You will need a 1/4-20 brash heat press insert to mount to magic arm.…
This model lets you convert an Audio-Technica AT2020 microphone to mount directly onto an Ikea Lanespelare lamp arm, turning it into a budget-friendly and functional microphone boom arm. The design consists of two printed parts: Ikea…
A bracket that clips onto the top of a monitor and holds an Audio-Technica AT2020 horizontally above it. Fits monitor edges up to 14 mm thick. No hardware required. Comes in two variants depending on which side you want the cable to exit:…
A shcok mount for the audio technica at2020 XLR (im not sure if it works with the usn one or not) THIS IS A REMIX!
A pop filter hook for the audio tecnica at2020 xlr
This is one of the first multi-part things that I've designed so honest feedback would be appreciated! This Mount requires the following Hardware: -1x M5x10 Screw -1x M5 Nut (abt. 4mm thick) -2x M3x6 Screws -2x M3 Nuts (abt. 2,5mm thick)…
2 part mic stand for AT2020, Don't have to use supports, just ramp up the cooling to max. Print the base upside down with PLA/PETG, Print the mic holder with 95A TPU,
