Simple Shock mount for Audio Technica AT2020
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple shock mount, with f3d format available so you can remix to fit your microphone.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 657
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
A very quickly thrown together working shock mount, made for the AT2020 but you can remix the f3d file to match your own needs!
Use rubber bands/o-rings/paracord or whatever you have for connecting the inner and outer ring.
Print middle ring with organic supports!!
- 0.4mm nozzle
- PLA at 180C°
- Original Scale
- 15% infill (You use whatever you like, really doesn't matter I think)
*NOTE: this is heavily inspired by @Ostella3D's shock mount, but I made a similar one from scratch due to it not quite matching my needs. Here is a link to Ostella3D's model: https://www.printables.com/model/119520-streaming-microphone-shock-mount-optimized-for-3d-